Energy saving advantages:

1. Pressure maintaining+operation mode, saving about 70% of energy consumption.

Under the pressure maintaining state, by reducing the rotational speed of the motor, the power consumption cost and oil rise are reduced.

2. It can be towed by two machines, and two equipment can use one energy-saving hydraulic station.

Through valve group control, one hydraulic station works for two machine tools at the same time, without affecting each other's work at different beats.

3. Lightweight structure, fuel and space saving.

The hydraulic station with equivalent efficiency only needs to use 30% of its oil storage capacity, saving two-thirds of the oil volume, and saving about 60% of the space.

4. High speed response capability to improve production efficiency.

The reaction time between pressure maintaining and maximum displacement operation is about 0.1 seconds. The European ABB controller, German sensor, and sensitivity sensing system are equipped with a Taiwan plunger pump. With a small inertia at low speed, it can achieve stop or operation switching within 0.1 seconds.

5. Constant temperature stability, reducing machine tool wear.

By monitoring the pressure, the load state during operation is coordinated to provide the necessary flow when necessary.

6. Simple operation, directly interfacing with the CNC operating system.

As long as the 220V/380V power cord is connected, the action can be carried out.

Maintenance of hydraulic station:

● The hydraulic station should be kept clean, which helps to increase the service life of the hydraulic station.

● The cleanliness of the hydraulic oil directly affects the wear of the oil pump and actuator components. Please maintain a hydraulic oil replacement at least once a year.

● This energy-saving hydraulic station requires N32 and above grinding hydraulic oil, and it is recommended to use well-known brands such as Meifu and Great Wall.

● Please check the oil quantity of the hydraulic station at a fixed time every day to prevent damage to the oil pump and other hydraulic actuating components due to excessive oil quantity caused by leakage.

● When the hydraulic station needs to change the workplace, if long-distance transportation is required, please use foam and wooden boxes for reinforcement before proceeding. The hydraulic station cannot be placed upside down during transportation。